LC/APC – ф2.0 Connector parts

Short Description:

Introduction: Appearance • comply with EU ROHS standards Characteristics: Plastic parts shall be free of injection defects, dirt, mechanical damage, good color consistency, flame retardant and pass the high and low temperature tests. The surface of hardware is not damaged, and the salt spray test is passed. • dimensions in accordance with IEC standards and good stability Application site: Telecommunication network, man, optical fiber communication system Optical fiber testing instruments •...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Housing Color: SX/ ST-LC
  • Product Detail

    Product Tags

    Introduction:


    Appearance

    comply with EU ROHS standards

    Characteristics:


    Plastic parts shall be free of injection defects, dirt, mechanical damage, good color consistency, flame retardant and pass the high and low temperature tests.

    The surface of hardware is not damaged, and the salt spray test is passed.

    dimensions in accordance with IEC standards and good stability

    Application site:


    Telecommunication network, man, optical fiber communication system

    Optical fiber testing instruments

    Optical CATV, optical sensor

    Fiber broadband access network, FTTH fiber to the home

    fiber distribution frame, rack and wall mounted fiber distribution unit

    Technical index


    Project

    Target

    Flame retardant test of plastic parts (UL94 V-0 grade) Burning vertically for 10 seconds, leaving the flame for 10 seconds and extinguishing; burning or hot particles falling from the test sample will not spread the combustion to the bottom layer placed under the test sample.
    hot test +85 for 168 hours. The product shall be free of deformation, crazing, and other mechanical damage.
    Cryogenic test -40 , lasting for 168 hours. The product shall be free of deformation, crazing, and other mechanical damage.
    Salt spray test 5% concentration, 48 hours, no deformation, peeling, corrosion, etc.
    Operating temperature, -40~+85
    Damp heat test Temperature: 40 ; relative humidity: 90% – 95%; duration: 168h, no mechanical damage such as deformation, crazing, relaxation, etc.
    Plug force test Allowable insertion and removal force: 19.6n maximum
    technical standard YD/T1272.1-2003  YD/T1272.3-2005

  • Previous:
  • Next: